Specifications - DJI ZENMUSE L1 Kurzanleitung

5. Power off the aircraft after the mission is completed and remove the microSD card from the L1. Connect
it to a computer and check the point cloud data, photos, and other files in the DCIM folder.
Read the Zenmuse L1 User Manual for more information about manual flight, setting parameters
for a Photogrammetry mission, and recording point cloud data by Linear Flight Mission.
Reconstruction in DJI Terra
Follow the steps below to reconstruct point cloud data in DJI Terra.
1. Launch DJI Terra, select New Mission, and create and save a point cloud post-processing mission.
2. Select in the mission editing view and import the folder from the microSD card. The folder will be
named after the time the point cloud data was recorded.
3. Click to start reconstruction and wait until it is completed.
4. In the reconstruction page, users can open the current mission folder using the keyboard shortcut
"Ctrl+Alt+F" to find the file and check the result of the reconstruction.
Read the DJI Terra User Manual for more information about how to configure and use
reconstruction in DJI Terra.

Specifications

General
Product name
Dimensions
Weight
Power
IP Rating
Supported Aircraft
Operating Temperature Range
Storage Temperature Range
System Performance
Detection Range
Point Rate
8
ZENMUSE L1
152×110×169 mm
930±10 g
Typical: 30 W; Max: 60 W
IP54
Matrice 300 RTK
-20° to 50° C (-4° to 122° F)
0° to 50° C (32° to 122° F) (when using RGB mapping camera)
-20° to 60° C (-4° to 140° F)
450 m @ 80% reflectivity, 0 klx
190 m @ 10% reflectivity, 100 klx
Single return: max. 240,000 pts/s
Multiple return: max. 480,000 pts/s