knapp WALCO V60 Montageanleitung Seite 16

WALCO 60 M12
Art. - No. K702/Set
1. Machined edge
Minimum milled dimension
30
60
Cutting depth can be selected as required or
screw on flat
*... Adjust the drilling depth to the adjustment range / length
of the screw!
2. Marking connector position with scribing jig
3. Assemble connector
4 Hex-head-wood
TORX 30
screws 6x50 mm
Page 1/2
WALCO® 60 M12 / V60
ETA-10/0189
7,5
Art. - No. K578
Countersunk screw M12 x 60
IS SW 8
2 Nuts M12
SW 19
Adjustability ± 10 mm *
* Slots can also be used
for adjustability!
**... dimension example refers to
WALCO V 60
Art. - No. K100/Set
1. Machined edge
Minimum milled dimension
depth
30
Cutting depth can be selected as required or
screw on flat
2. Marking connector position with scribing jig
3. Assemble connector
1 connection contains
Set K702 and Set K100
5 5
(22)
15 11
62 **
countersunk screw M12 x 60 mm
Assembly Instructions
Wall connector for curtin wall
7,5
60
4 Hex-head-wood
screws 6x50 mm
depth
Art. - No. K578
TORX 30