Quax TRENDY-Serie Handbuch Seite 17

TRENDY
54 03 42xx-E
Step 2 : Use the parts of step 1, two eccentrics C and four wood screws D
Push an eccentric (C) in the hole on the inside of the supports (4L and 4R). Push the baseplate (3) with its
connectors into the holes and over the wooden dowels of the supports. Tighten the eccentrics. Push the
sides (2) with their dowels into the holes in the base plate. Push the wood screws (D) in the holes at the
bottom of the baseplate and tighten into the sides.
Step 3 : Use the parts of step 2, the back 1 and four wood screws D
Push the back (1) on the wooden dowels of the sides (2). Push four wood screws (D) in the drillings behind
the back and tighten into the sides.
Step 4 : Use the parts of step 3, the Trendy chest of drawers 54 03 42xx-4D and two wood screws D
Remove the top drawers of the chest of drawers. Place the extension on top of the chest of drawers and in
front of the drillings in the upper back. Push two wood screws (D) in the holes of the upper back and tighten
into the bottom panel of the extension. Replace the drawers.
Luierextensie
Wickelansatz
Plan à langer
Changing extension
Quax Quax
First dreams First dreams
® ®
First steps First steps
17