KARE design 78848 Montageanleitung Seite 11

78848
Dresser Efficiency Wood 1 Door 4 Drawers
(pg 10 of 13)
Step 11. [Use Screw E (#16) for this step] Fit and
attach Small Drawer Side Panels (#12-2 & #12-3), one
at a time, into the back of the stainless steel Small
Drawer Front (#12-1). Make sure the Small Drawer
Side Panels are placed in all the way, making contact
with the rear of the Small Drawer Front Panel, so that
when placed correctly, the screw tabs of the Small
Drawer Side Panels are hidden from view under the
rear surface of the Small Drawer Front.
Step 12. [Use Screw E (#16) for this step] From above,
fit and attach the Drawer Base Panel (#12-4) in
between the two sides and into the back of the Small
Drawer Front Panel (#12-1). Again, do not tighten any
one screw fully until they (screws) are all in partially.
Step 13.
[Use Screw E (#16) for this step] Attach the Small Drawer
Back Panel (#12-5) to the rest of the assembled drawer. Once you
have the first small drawer assembled, repeat steps 11-13 to assemble
the other two small drawers. Once completed, you should have three
small drawers.