Renkforce 2339784 Bedienungsanleitung Seite 5

Operating Instructions
Stationary 2D barcode scanner
Item No. 2339784
Intended use
This omnidirectional barcode scanner reads both paper and smart-device 1D/2D barcodes
and features a USB HID interface and integrated read beeper and LED indicator. It comes with
a stand and mounting holes, allowing it to be used hands-free in a kiosk, self-service area or
as a desktop QR code reader.
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture,
e.g. in bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you
use the product for purposes other than those described, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Scanner
• Gooseneck with cover
• Holder
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- Is visibly damaged,
- Is no longer working properly,
- Has been stored for extended periods in poor ambient conditions, or
- Has been subjected to any serious transport-related stress.
• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product.
• Consult an expert when in doubt about the operation, safety, or connection of
the appliance.
• Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Caution:
• To avoid damaging the components, do not attempt to open or repair the product
without professional guidance.
• Stand
• Quick guide
• Operating instructions
• The operating range may be affected by environmental factors and nearby
sources of interference.
• Proper use helps to prolong the lifespan of the product.
b) Connected devices
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
c) LED light
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
Operating elements
Scanner setup
• To mount the scanner, use M2 screws that are 3 mm longer than the mounting plate
thickness. For example, if the plate thickness is 4 mm, use 7 mm M2 screws. The mounting
hole locations are shown below.
• Connect the barcode scanner to a PC with the supplied cable.
• If you are not sure how the scanner is configured or if you have scanned the incorrect
codes, scan the "Default" barcode below to reset the scanner to factory defaults.
• Press the trigger button on top of the scanner to activate the scanning line, and then scan
the required settings barcode. The scanner will enter presentation mode by default, where
barcodes are read automatically.
Connect to PC
Default