Introduction; Device Description (Fig. 1); Scope Of Delivery; Intended Use - Redstone MT100 Original Bedienungsanleitung

1. Introduction

Manufacturer:
LEROY MERLIN
Rue Chanzy
Lezennes 59712 LILLE Cedex 9
France
Dear customer,
we hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations.
The operating instructions contain important informa-
tion on how to operate the machine safely, profes-
sionally and economically, how to avoid danger, cost-
ly repairs, reduce downtimes and how to increase
reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regu-
lations that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information.
The machine can only be operated by persons who
were instructed concerning the operation of the ma-
chine and who are informed about the associated
dangers. The minimum age requirement must be
complied with.
In addition to the safety instructions contained in this
operating manual and the specific regulations of your
30 | GB
LEROY MERLIN • Rue Chanzy - Lezennes 59712 Lille Cedex 9 - FRANCE
country, the technical rules generally accepted for the
operation of machines of the same type must be ob-
served.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

2. Device description (fig. 1)

1. Machine head
2. Locking switch
3. On/off switch
4. Handle
5. Claming handle
6. Clamping jaw, flexible
7. Clamping jaw, fixed
8. Quick clamping lever
9. Shaft locking mechanism
10. Mobile cutting wheel cover
11. Fixed cutting wheel cover
12. Locking chain (transport)
13. Allen key (8 mm - cutting wheel replacement)
14. Carrying handle
15. Cutting wheel

3. Scope of delivery

• Metal cutting machine
• Allen key SW8mm
• Size 17/14 open-ended spanner
• Clamping grip
• Carbon brushes
• Operating manual

4. Intended use

The metal cutting machine is used to cut metals ac-
cording to the machine size.
The equipment is to be used only for its pre-
scribed purpose.
Any other use is deemed to be a case of misuse. The
user / operator and not the manufacturer will be liable
for any damage or injuries of any kind caused as a
result of this. Only cutting wheels that are suitable for
the machine may be used. The use of HSS, HM, CV,
etc. saw blades of all types is prohibited.
To use the equipment properly you must also observe
the safety information, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the equipment have
to be acquainted with this manual and must be in-
formed about the equipment's potential hazards.
It is also imperative to observe the accident preven-
tion regulations in force in your area.
The same applies for the general rules of health and
safety at work.