Werbung
Verfügbare Sprachen
Verfügbare Sprachen
F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter F97 / X3M - F98 / X4M
Fitting...
Fig. 4
Mount the AC Schnitzer bracket supplied on the front
axle longitudinal member as shown. To do this, reposi-
tion the oil cooler and tighten the AC Schnitzer bracket
using the standard fixing bolts.
Note right and left are different!
Fig. 5
Cut right and left wheelarch underfloor panelling as
shown using an air saw or similar.
Fig. 6
Refit wheelarch underfloor panelling.
Warning:
Only tighten fixings in the rear area and the front
centre fixing bolt.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 297 310 / Issue: 12.03.2020 / TSch / REV01
125mm
20
40mm
40mm
Werbung
