Recalling Past Readings - Rudolf Riester ri-thermo sensioPRO Bedienungsanleitung

STEP 4. Read the result. The Bluetooth symbol is for ri-thermo
tymPRO+ only.
STEP 5. Press ejection button to discard used probe cover into trash.
NOTE:
• You can turn off the thermometer by pressing and holding the
button. Or, it will automatically turn off when left idle for 1 minute.
• If the reading is ≤ 31.9°C (89.5°F ), the display will show "Lo" with red
backlight.
• If the reading is ≥ 32°C (89.6°F) and < 37.9°C (100.3°F), the display
will show the reading with green backlight.
• If the reading is ≥ 38°C (100.4°F) and < 43°C (109.4°F), the display
will show the reading with red backlight.
• If the reading is ≥ 43.1°C (109.5°F), the display will show "Hi" with red
backlight.

RECALLING PAST READINGS

Your thermometer stores 8 (ri-thermo
tymPRO) most recent readings.
STEP 1. Press and release the
thermometer.
®
tymPRO+) / 10 (ri-thermo
button to turn on the
EN-10
®
®