Seite 1
User Guide Guide d’instaIIation Montageanleitung Carry’Dog This user guide provides basic information about the assembly of the Carry’Dog module and its installation. Please refer User Installation Guide for safety instructions and additional information: https://add- bike.com/en/customer-service/cargo-bike- documentation/ Ce guide d'installation apporte des informations simplifiées concernant l'assemblage du module Carry’Dog sur l’...
Contents of the parcel Contenu du carton Verpackungsinhalt Casing Enveloppe Hülle Cover Couvercle Crossbar Tube Querstange transverse Abdeckung Front Tubes Vorderrohre tubes avant Upper Tubes haut Oberrohre tubes Compact Latte de Verbindungsleiste slat compact Front textile Textile avant Frontschutz Screws BHC M5 Vis BHC M5 Floor mat BHC M5 Schrauben...
Seite 3
Summary Sommaire Inhaltsverzeichnis Frame Bâti Rahmen Textile Textile Textile Fabric attachment and finishing Attache du tissu et finition Textilbefestigung und Verarbeitung...
Seite 4
Rahmens Remove the 4 screws on each side of the top of the backrest and seat of the AddBike Retirer ces 4 vis de chaque côté du haut du dossier et de l’assise de l’AddBike Entfernen Sie diese 4 Schrauben an jeder Seite der oberen Rückenlehne und...
Seite 5
Insertion of the Insertion du textile Anbringung des textile Textils Install the textile by inserting the two lower elastic bands into the front tubes Installez le textile en insérant les deux bandes élastiques inférieures dans les tubes avant Bringen Sie das Textil an, indem Sie die beiden unteren Gummizüge...
Seite 6
Spannen Sie den Stoff auf jeder Seite und zentrieren Sie das textile Teil so gut wie möglich auf der Rückenlehne. Verify that no cables from the AddBike are caught in the strap clamps. Aucun câble de l’AddBike ne doit être pris dans le serrage des sangles.
Seite 7
Insertion of the crossbar into the front textile sleeve Insertion de la barre transverse dans le fourreau du textile avant Schieben Sie die Querstange in die Hülle des Frontschutzes Position the crossbar between the two holes formed at the front of the module between the upper and front tubes, then fix these parts using 2 BHC M5x30 screws Positionner la barre transverse entre les...
Seite 8
Fabric attachment Attache du tissu et Anbringung des and finishing finition Textils und Fertigstellung Assemble the front textile with the Carry'Dog's cover using Velcro fasteners Assembler textile avant avec l’enveloppe de la Carry’Dog à l’aide des scratchs Montieren Sie den Frontschutz mithilfe der Klettverschlüsse auf der Hülle des Carry’Dogs Assemble the floor mat in the bottom of the Carry'Dog by attaching the four press studs...