X Rocker Elite Pro Handbuch Seite 5

ENG
Programming and Macro function:
The M1, M2, M3, M4, rear buttons default to ABXY buttons when the
Switch console is turned on.
- To set a macro button, press Turbo and Mx button to step into
Macro setting mode, the mode LED light and LED2, LED3 light
indicate that the controller is in Macro Mode.
- Release Turbo and the Macro button then press the buttons
which you need set, when finished, press the Macro button to
save and exit. The Indication LED's will turn off, indicating that the
macro is saved.
Charge Indicator:
1. When the controller is in charging mode while the console is
turned off, the LED's on the controller will flash to indicate power is
connected. Once fully charged, the LED will turn off.
2. When the controller is charged with the console turned on. The
LED Will flash and then remain constantly on when fully charged.
3. When the battery is low, the controller LED will flash in bursts of
three flashes until connected to charge.
4. When the battery reaches almost empty, the
controller will change to sleep mode and will require USB
connection to continue use.