Adjust Turbo Speed
You can set the following buttons to Turbo Mode: A/B/X/Y/L/ZL/R/
ZR button
To Enable/Disable the manual and auto turbo speed function:
1. Turn on Turbo function
Pressing (at the same time)
set to enable Turbo for that button.
2. To make the Turbo-enabled button automatic
Press (at the same time)
enabled.
3. Turn off Turbo function
Pressing (at the same time)
enabled as auto turbo to clear.
To Disable all buttons turbo speed function: Press the minus (-)
button and the down button of the direction pad at the same time.
How to increase the turbo speed:
When a button is Turbo enabled, hold
up on the right analogue stick. This will increase on level of turbo
speed.
How to decrease the turbo speed:
When a button is Turbo enabled, hold
down on the right analogue stick. This will increase on level of
turbo speed.
Adjust vibration Intensity
There are 4 levels of vibration intensity: 100%-70%-30%-0%
(No vibration). By default the controller is at 50% intensity.
How to increase the vibration intensity: Press the Plus (+) button
and the up button of direction pad at the same time for 3s, this will
increase one level of
vibration intensity.
How to decrease the vibration intensity: Press the Minus (-) button
Press button and the up button of direction pad at the same time
for 3s, this will decrease one level of vibration intensity.
button plus the button you wish to
button plus the button you previously
button+ the button you previously
for 5 seconds and press
for 5 seconds and press
ENG