Herunterladen Diese Seite drucken

ABB XT6 UL Installationsanleitung Seite 10

Vorschau ausblenden Andere Handbücher für XT6 UL:

Werbung

18
19
NO
NO
OK
20
Connected
Undefined
Test
Undefined
Disconnected
SACE Tmax XT | ABB
Posizionare la parte mobile nella parte fissa e spingerla sino
a quando va in arresto.
Position the moving part in the fixed part and push until it
comes to a stop.
Das bewegliche Teil im festen Teil anordnen und es
schieben, bis es anschlägt.
Placer la partie mobile dans la partie fixe et la pousser
jusqu'à ce qu'elle arrive en butée.
Poner la parte móvil en la parte fija y empujarla hasta el
bloqueo.
活动 分调 固
分的
Portare l'interruttore in posizione "Open"
Switch the circuit-breaker to the "Open" position
Den Leistungsschalter in Position "Open" bringen
Placer le disjoncteur en position "Open"
Poner el interruptor en posición "Open"
将断路器切换到"Open"位置
Inserire la manovella nella parte mobile. In questa fase la
parte mobile è in posizione DISCONNECTED.
Insert the crank in the moving part. In this phase the moving
part is in DISCONNECTED position.
Die Handkurbel in das bewegliche Teil stecken. In dieser
Phase befindet sich das bewegliche Teil in der Position
DISCONNECTED.
Introduire la manivelle dans la partie mobile. Dans cette
phase la partie mobile est en position DISCONNECTED.
Introducir la manivela en la parte móvil. En esta fase la parte
móvil está en posición DISCONNECTED.
往移动部分上插入摇把。 这过程中,移动部分仍处于
DISCONNECTED 位置.
XT6 3p-4p W
, 并向前 动
.
XT6 3p-4p W
XT6 3p-4p W

Werbung

loading