Using The Appliance For The First Time - WMF Kult X Gebrauchsanweisung

Using the appliance
The device is suitable for mixing and chopping foods such as fruit, vegetables and nuts as well as for
preparing juices, smoothies and shakes. The blender has 5 speed settings and a pulse function. Unplug
from the mains after use.

Using the appliance for the first time

Clean the glass jug with blade unit, lid and closing cap before using the appliance for the first time as
described in the chapter "Cleaning and Care". Take care not to injure yourself on the sharp blade.
Turn the selector switch to the OFF position and place the glass jug on the drive unit as shown in the
diagram. The handle must be facing to the right.
Add your ingredients. Note the maximum filling level on the mixing container. Filling past this amount
may lead to overflowing, depending on the consistency of the ingredients.
Note: Only food with a maximum temperature of 60°C may be processed. Close the mixing container
using the lid and closing cap.
Caution: The blender will only switch on if the mixing container and lid have been fitted correctly. A
safety shutdown prevents operation without the jug and lid.
3
1
marker reaches the ON position. Turn the knob further to the right to set the desired speed. Five
different speeds can be set. To switch off, turn the knob in a counter-clockwise direction until the
marker reaches OFF. Turning the speed controller further to the left from the OFF position selects the
pulse function. In this position, the motor does not run constantly, but switches off the moment you
let go of the knob. Once you have finished mixing, turn the speed controller to the OFF position.
Warning: risk of injury!! Always wait for the blades to come to a complete standstill before
removing the lid. Do not reach into the appliance before the mains plug has been unplugged.
Completely empty the glass jug after use. Do not leave any liquid in the jug.
To this end, place the spout of the lid sideways against the
2
pouring spout on the mixing container and gently press the lid
onto the mixing container (1). Then press the locking mechanism
on the lid downwards until it clicks into place in the handle (2).
Additional ingredients may be added by removing the closing
cap, even while the motor is running. The closing cap (3) can be
removed by turning it counter-clockwise and can then be used
as a measure (50 ml).
Turn the speed controller in a clockwise direction until the
13