Operation - Redmond SkyScales RS-741S-E Bedienungsanleitung

4. UNIT button – measurement unit selection, enable/disable signals, parameter
value adjustment
5. LCD display
6. button – to switch on/off timer
7. Battery compartment
Display (scheme A1 , p. 3)
8. Timer indicator
9. Measurement unit indicators
10. Tare weight indicator
11. Low battery indicator
12. Weigh value/timer indicator
I. PRIOR TO FIRST USE
Carefully remove the appliance and its accessories from the packaging. Dispose of all
packaging materials.
Keep all warning labels, including the serial number identification label located on the
housing.
After transportation or storage at low temperatures allow the appliance to stay at room
temperature for at least 2 hours before using.
Before the use ensure that the battery is installed correctly with regard to polarity. Close
the battery compartment cap.
CAUTION! Batteries, included in set, are intended only for checking the appliance op-
erational capability. For extended operation of the appliance it is recommended to
purchase a new set.
Installing the battery ensure that your hands and the unit are dry.
II. OPERATION
The Ready for Sky technology
The Ready for Sky technology enables to use the software app of the same name to
control the appliance remotely from a smartphone or tablet.
1. Download the software from the App Store or Google Play (depending on your
operating system) onto your smartphone or tablet.
6
For the minimum supported OS version, see the company's official website www.redmond.
company or the application description at the App Store and Google Play.
2. Open the Ready for Sky app, create an account, and follow the prompts that appear
on the screen.
3. Enable the Bluetooth function on the mobile device.
4. Switch on the scales by pressing the
5. Open and update the list of appliances available for connection with the mobile
device.
6. Select the connected appliance from the list of available devices.
To provide stable connection the mobile device should be located within no more than
15 metres from the appliance.
Appliance use
1. Press the button. All indicators will be displayed, then 0 value and the meas-
urement unit indicator will be displayed.
2. The default measurement unit is grammes (g indicator). By pressing the UNIT
button you can replace the measurement unit with pounds and ounces (Ib oz
indicator). Adjusted parameters are saved upon the subsequent weighting.
3. Fix the container onto the scales platform in which you plan to weigh a product.
Press TARE button to reset the container weight value.
It is also possible to ignore the container weight by placing it to the scales platform
for switching on the appliance. The weight value will be automatically reset to zero
when scales are switched on.
4. Put the product into the container. Product mass will be displayed (excluding tare
weight).
5. The scales will be automatically disabled in 5 minutes at the end of operation.
If necessary, they can also be disabled by pressing and holding the
several seconds.
If the battery capacity is exhausted the low battery message Lo will be displayed.
Kitchen timer
REDMOND SkyScales RS-741S-E can also be used for tracking cooking time.
1. Press the button. The timer indicator and the time value of 00:00 in the
«minutes:seconds» format are lit up solid on display.
2. Set the first symbol value by pressing the UNIT button. Press
the value. Repeat the process for other symbols.
button.
button for
button to confirm