Ribimex Ribiland PRBAT20/S Bedienungs- Und Wartungsanleitung Seite 19

Symbols (Explanation of symbols appearing on the tool, if applicable).
Warning! Read the instruction manual before operating this machine or prior to
carrying any intervention (e.g. cleaning, maintenance, repair ...) on the tool.
Follow all warnings and safety precautions to avoid a danger
Caution! Risk of injury and/or damage and/or deterioration of product in case of non-
compliance to safety requirements.
Do not expose to weather conditions (ex.: rain, snow ...) or to moisture.
Do not use outdoors during weather conditions. Do not leave outdoors while it is
raining.
Do not expose product to extreme temperatures (too hot or too cold environment).
Protect from over exposure to direct sunlight.
Wear protective equipment!
Wear eye protection.
Wear ear protection.
The machine may exceed 85 dB(A) at the workplace; in this case, noise protection
measures need to be taken to protect the user.
Wear dust mask.
Wear protective gloves and boots.
Wear appropriate clothing.
Keep all parts of your body away from moving parts, the blower opening.
Keep hands and feet away from the openings while tool is running.
Keep hands and feet out of the openings while tool is blowing.
Do not touch. After intensive use some parts can get hot such as the motor housing.
Keep persons (esp. children) and animals away from product and working area.
Other persons and animals should remain at a safe distance of 3 meters or more when
the machine is being used.
The operator is solely responsible for third persons in the working area.
Stop tool as soon as someone enters the working area.
Never direct the suction/blown air opening toward persons or animals.
Wear appropriate protective equipment.
Caution! Danger of injury from flying parts!
Keep persons (esp. children) and animals away from product and working area.
Noise level. Wear ear protection.
Tool complies with European directives
Warning: Electrical hazard. Presence of electric current.
Unplug charger immediately from its power supply if its power cord or the extension
cord are damaged. Unplug charger by pulling the plug. Do not pull the cable.
Disconnect charger from its power supply and remove the battery before proceeding
to any maintenance, cleaning or any intervention on product; before leaving tool
unattended or when tool is not used for prolonged periods of time.
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre.
Please contact your local authority or local recycle centre for further information for
its safe disposal.
Page 19 / 78