Ribimex Ribiland PRBAT20/CB Bedienungs- Und Wartungsanleitung Seite 24

terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions of use, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or burns.
e) Ensure that the switch is in the OFF position before inserting the battery. Inserting the
battery into power tools with the switch on invites trouble. Injury hazard.
3.2- Additional safety rules for Grass Trimmers
a) Keep all parts of the body away from the cutting device. Do not remove cut material or hold
material to be cut when the cutting device is moving. Make sure the switch is in the OFF position
and battery is removed when clearing jammed material. A moment of inattention while operating the
tool may result in serious personal injury
b) Carry the tool by the handle with the cutting device stopped. When transporting or storing the tool
always cover the nylon blade cutter. Proper handling of the tool will reduce possible personal injury
from the cutting device.
c) Hold the tool by gripping surfaces only (handle).
d) Wear eye protection and gloves.
e) Never allow children or people who are not familiar with these instructions to use the machine.
f) Stop using the machine when people, in particular children or pets, are nearby or enter into the
working area. A minimum 15m distance is recommended.
g) Only use the machine in daylight or bright artificial lighting.
h) Inspect the working area before using the tool. Remove all debris and hard objects such as rocks,
glass, wire, etc., that could cause injury or damage during operation
i) Avoid accidental starting. Ensure the switch is in the OFF position before inserting the battery.
Keep your hands and fingers away from the switch while inserting the battery.
j) Never run the tool without the proper equipment attached, such cutting or protective devices.
Use only with attachments and/or accessories supplied or recommended by the manufacturer.
k) Make sure that any ventilation holes are free from dirt. If required, use a vacuum to clear
obstructions.
l) Switch off the tool when transporting to and from the area to be worked on or between two
working areas.
m) Before starting to operate the machine and after any impact check for signs of wear and tear or
damages and have the necessary repairs carried out. Never use the machine when the protection is
damaged or missing
n) Always keep hands and feet away from the cutting unit, especially when you switch on the engine.
o) Treat the cutter that is used to cut the length of trimming line with care – you could injure yourself
with it. After you've pulled out a new thread always keep the machine in its normal working position
before switching it on.
p) Never use anything other than the correct nylon cutting line.
q) After refilling the spool, pull the line with your hands, and then always turn the tool to its normal
operation position before switching on.
r) Do not press with your hand on the spool to feed the line, as the spool may be hot.
s) Remove any grass or debris from the spool before refilling the line or changing the spool.
Page 24 / 89