Jacob Jensen JT50UK Bedienungsanleitung Seite 20

On the handset:
Enter the base PIN code.
Preset base PIN code is 0000.
When in standby, the new handset number will be displayed.
The handset will automatically be allocated with the next
available handset number.
If the registration is unsuccessful, the display will show "not
registered" and you will need to follow the registration
procedure again.
i .2 . deregister a handset or a base
If you have more than one handset registered to your base
or more than one base registered to your handset(s), you
can deregister both the handset from the base or the base
from the handset. Before deregistration, make sure that all
handsets and the base are in standby.
Key Map:
Add . Settings
select the handset or base
1. Press to access the main menu.
. Press / to select "Add. Settings" and press
3. Press / to display "Deregister" press
to confirm.
4. Press / to select "Handset" or "Base" and
press to confirm.
5. Press / to select "Yes" and press
6. Press to exit and return to standby.
i .3 . Changing the pin code
Key Map:
Setting base
a new PIN code
The default Base Pin code is 0000. If you want to change to a
new PIN code, follow the above procedures while you enter
a new 4 digits base PIN code.
0
deregister
select yes
.
base pin enter
i .4 . resetting your phone
If you reset your phone, the base will return to the default
settings. The time, date, handset name, phone book, call log
list and redial list will not return to default. If you have more
than one handset registered to your base and you complete
the following procedure, only the handset you reset and the
base will go back to the default settings.
For the base
Key Map:
Setting base
select yes
1. Press to access the main menu.
. Press / to select "Setting Base" and press
3. Press / to display "Base Reset" press
to confirm.
4. Press / to select "Yes" and press
confirm.
5. Press
to exit and return to standby.
For the cordless handset
Key Map:
Add . Settings
select yes
1. Press to access the main menu.
. Press / to select "Add. Settings" and press
3. Press / to display "Handset Reset" press
to confirm.
4. Press / to select "Yes" and press
confirm.
5. The display shows "Cleared" and returns to factory
default.
base reset
to
handset reset
to