Caller Identification Memory (Caller Id); Personalizing Your Phone - Jacob Jensen JT50UK Bedienungsanleitung

4. The desirable phone number is saved to the selected speed
dial key.
f .8 . to dial out an entry of the memory keys
1. Lift the handset and press the speed dial key or just press
the speed dial key from idle.
. The phone number and name will show on the display.
3. The unit will enter speaker phone mode and dial the
number.
g .

CAllEr idEntifiCAtion MEMory (CAllEr id)

If Caller ID service is available from your service operator and
you have subscribed to this service, the telephone number
of the caller will be shown on the screens of handset when
there is an incoming call. In FSK caller ID system, name of the
caller and date time stamp will also be displayed and stored
if they are available. Only the first 13 letters of the caller's
name are displayed.
This DECT phone stores the last 30 Caller ID records into the
Caller ID memory. It can store up to 4 digits long and names
up to 13 characters long. The oldest record will be replaced
by the newest record. If the caller has withheld their listing,
"Unavailable" or "Private" will be displayed or, if the
number is unavailable the display will show "Unavailable".
You will not be able to dial back an entry with one of these
messages.
Call waiting tone
This model has a special call waiting tone in addition to the
one you typically hear from your local service provider. This
tone will be heard after the standard tone when you receive
a call waiting notification. The tone is provided as an extra
feature and will have to be turned on in order to activate
as the default setting is set to "Off". To turn this feature
on, go to the menu, select "Audio Setting", "Tones", and
"Call Waiting" – then set the feature to "On". When the
call waiting tone is turned on, you will be alerted by the call
waiting tone when receiving a second external call. If the
call waiting tone is disabled, you do not get a call waiting
tone signal. When activated you can toggle between the
calls by pressing . Please note that this function is
dependent on your service provider.
18
g .1 . to review Caller id records
To review Caller ID records, press
Log List". Use /
press to exit and return to standby.
g .2 . to make a call from Caller id records
You may make a call from the Caller ID records. Press
and select the "Call Log List". Use
and select the desired number/name.
Pick up the handset or press
desired caller's number/name when reviewing the caller ID
records.
g .3 . to delete Caller id memory
You may delete either a single or all records in the Caller ID
memory.
1. Press and select the "Call Log List". Use
to scroll and select the desired entry you intend to
delete. If you want to delete all entries, skip this step.
. Press to select "Erase Entry" or "Erase List".
3. Press
to select "Yes" or "No". Then press
confirm.
g .4 . Message Waiting indicator (MWi)
If Voice Message service is available from your service
operator and you have subscribed to this service, the symbol
of Message Waiting
voice message is left in your message box registered with the
telephone operator. This is also supported by the LED light
blinking on the base.
Depending on your service operator's service, Message
Waiting Indicator should turn off automatically when you
have checked your left message in the operator's server.
h .

pErSonAliZing your phonE

This DECT phone is built with features to offer you
personalized settings such as ringer type, ringing volume
and key click.
Referring to the description of the MENU buttons in previous
section, all these personalized settings can be programmed
via Menu Programming mode.
and select the "Call
to scroll among records, or
/
or to dial the
will be shown on the screen when a
to scroll
/
to