Jacob Jensen JT50UK Bedienungsanleitung Seite 15

Insert a pause between the EXTERNAL LINE DIGIT and the
TELEPHONE NUMBER.
1. Press the numeric keys to enter the EXTERNAL LINE DIGIT.
. Press to insert a pause. The display shows "P".
3. Press the numeric keys to enter the TELEPHONE NUMBER.
E .10 . hold
To place a call on hold:
1. Press to hold/mute the call.
. Press again to retrieve the call.
E .11 . last number redial (redial)
There are 10 outgoing call logs stored. To redial a call,
press at standby mode and then select the number
by or . Pick up the handset or press
to dial the phone number.
You can also redial the call log number during off-hook:
Pick up the handset, or press
tone then press and select "Redial". Use
to select the name, number, or the handset you want
to call. Press to confirm.
E .12 . recall (flash)
Use the button to activate custom calling services
such as call waiting or call forwarding, which are available
through your local phone company.
E .13 . to make & receive internal calls (intercom)
• Make intercom calls between the cordless handset and
the base unit telephone.
• Transfer an outside call between the cordless handset
and the base unit telephone.
Internal communication (INTERCOM) can be made between
the phone and an attached wireless handset or between
two attached wireless handsets – like intercom, call transfer
& conference conversation. Your phone and the handsets
are given an individual extension number. This individual
extension number will be used when making intercom, call
transfer & conference conversation. Extension number for
handset(s) starts from 1 to 6. The extension name for the
phone is T50.
If you have got extra cordless handsets registered to your
base unit, refer to the section E .19 .
or
or . Wait for a dial
or
E .14 . to make an internal call between the base unit and a
cordless handset
You may make intercom from the base unit to a specific
handset extension.
1. Press and select the "Internal Call"
. Use or to select the name, number, or
the handset you want to call. Press
will ring. The icon is displayed and you will hear the
internal call dialling tone.
3. When the called handset answers, pick up the handset to
start conversion.
E .15 . to answer an internal call
When the telephone is called from a cordless handset, the
name of the cordless handset will show on the display and
the internal ringing tone will be heard. Pick up the handset
to start intercom conversion.
E .16 . to end an internal call
Put the handset on the cradle or press
end the call.
E .17 . to page all handsets from the base
You can only page all registered handsets at the same time
by pushing the PAGE button on the base unit. If you have
misplaced your handset, you may also use the PAGE function
from the base unit to make a page ring at the handset.
E .18 . Call transfer & Conference Conversation
Transferring a call
You can transfer an external caller from the base unit to a
cordless handset or vice versa:
During an external call:
1. Press and select the "Internal Call".
. Press or
handset you want to transfer the call to and press
The external caller is put "on hold" and the called handset
will ring.
3. When the called handset answers, put the handset on the
cradle or press
the called handset does not answer within 30 seconds, the
external caller will return to you again.
. The handset
or
to select name, number or the
or once to transfer the call. If
.
to
.
15