Contraindications - Zelmer ZKS1500N Benutzerhandbuch

EN
4. Close the cover again
5. Place the appliance on a horizontal, solid, rigid, flat, stable surface that is free of vibration.
6. Pressing the power button will display "88888," then displaying value zero (when the scale is in the
correct position, a triangle appears to indicate that the weight is stabilized). If you wish to change the
measurement, press the unit button and choose either g, oz, lb, ml, fl.oz.
7. This scale has a tare function that enables different products to be weighted without the need to empty
the container you are using. Place the container once it is turned on and press the Tare button, which
will display the icon"-0-" indicating that it is set to 0 and then 0 will appear. Place the first product to be
weighed and press the Tare function again and 0 will appear again, and so on until all the items have been
weighed.
8. Keep the on button pressed down for a few seconds and it will turn off, otherwise it will turn off in 2
minutes when pressed.
9. Replace the appliance in a safe place.
EUROGAMA Sp. z o.o. disclaims all liability for damages that may occur to people, animals or objects,
for the non-observance of these warnings.

CONTRAINDICATIONS

This product is for domestic use only and not intended for professional use.
Children should be supervised by an adult in order to prevent the device being used as a toy.
This appliance is not intended for use by persons (including children) with any reduced physical, sensory
or mental capacities, or who do not the sufficient experience and knowledge necessary, unless they are
supervised by a person responsible for their safety.
REPAIRS
Only specialized personnel may carry out repairs on electrical devices. Any incorrectly performed repair
may lead to considerable danger to users. Please contact after-sales service for any repairs. Failure to
follow the instructions entail the total loss of the product guarantee.
OPERATING INSTRUCTIONS
USING A CONTAINER TO WEIGH
1.Turn on scale by pressing the ON/OFF button. The display will show the values presented below.
If the ON/OFF button is held for 2 seconds, it will auto-o .
8