Sabiana UP-TOUCH Gebrauchsanweisung Seite 43

English
Fig."G"
2) Programming (Fig. "G"):
• Press the "M" button; the operation mode symbol
will start flashing.
• Press the (+) or (-) button until the clock symbol " "
is selected; confirm with the "M" button.
• Press the "+" button twice; "Prd" will display. Press
the "M" button to confirm.
• The display shows the message On 1, switching
on time of the first day of the week, and the message
00:00.
Use the (+) or (-) buttons to set the desired switching
on time.
Confirm with the "M" button.
• The display shows the message OF 1, switching
off time of the first day of the week, and the message
00:00.
Use the (+) or (-) buttons to set the desired switching
off time.
Confirm with the "M" button.
• Then you can programme all 7 days.
After the last programming press the "M" button to
confirm and return to the main menu display.
• Press the "M" button for more than 2 seconds to
return to the operation status.
> 2 sec.
43