Sabiana UP-TOUCH Gebrauchsanweisung Seite 41

USE OF THE CONTROL
Fig."A"
On/Off (Fig. "A"):
• By pressing the ON/OFF button the control is
switched on.
• Pressing the ON/OFF button again switches the
control off.
• The status "ON" or "OFF" is shown on the display.
Fig."B"
Setting the Setpoint (Fig. "B"):
• Press the "+" or "-" button: 'Set' starts flashing
• Set the required temperature value using the "+" or
"-" buttons.
Fig."C"
°
Mode selection (Fig. "C"):
• Press the "M" button to select the desired
operation mode:
- the cooling function is set.
- the heating function is set.
- the ventilation-only function is set.
• Press the "M" button to confirm.
Fan speed selection (Fig. "D"):
• By pressing the
FAN
-
Low fan speed
-
Medium fan speed
-
High fan speed
-
sets the automatic variation of the fan
speed.
41
English
button you can select: