SW-Stahl 32255L Bedienungsanleitung Seite 11

L I G H T I N G
Experience has shown that some components of a motor vehicle are poorly illuminated and hidden.
the test unit is equipped with a lighting device. The light appears, as soon as the unit is connected to
the battery of a motor vehicle and put into operation.
ATTENTION
Please read the instructions for use carefully before using the car multitester!
P O W E R S U P P LY
1.
Plug the black cable with the terminal to the
negative terminal of the battery.
2.
Plug the red cable with the terminal
to the positive pole of the battery
S E L F -T E S T
If the unit is working properly, it should show the following results:
•
Red LED light comes on when the polarity switch is pushed forward. (to the positive side)
•
Green LED light comes on when the polarity switch is pushed back. (to the negative side)
32255L_manual_75030_de_en_fr_roh.indd 11 32255L_manual_75030_de_en_fr_roh.indd 11
3 2 2 5 5 L
11
14.12.20 17:43 14.12.20 17:43