Amewi BINARY V2 Bedienungsanleitung Seite 26

1. Assemble two pcs of side stand as picture shown.
2. Install two pcs of long tube between two side stand as picture shown.
3. Install four pcs of EVA on the hull support as shown. This will protect the hull bottom from scratches during construction and
storage.
1. Insert the two removable keels on the bottom of hulls as picture shown.
Notice the keel direction, make sure keel is fully pressed down and tight on hull.
DISPLAY STAND ASSEMBLY
TAKE BOAT & SAILS OUT FROM BOY
BEDIENUNGSANLEITUNG/MANUAL BINARY V2
26