Iomega Network Attached Storage Bedienungsanleitung Seite 6

4. Reboot the Iomega NAS and disconnect the keyboard and DVD drive.
NOTE: If you are unable to disconnect the keyboard and DVD drive
before the Iomega NAS reboots, let the Iomega NAS boot completely
into the recovery environment and then select cancel. The Iomega
NAS will reboot and you can then unplug the keyboard and DVD
drive.
5. Allow the Iomega NAS to finish the automated rebuild process. The
NAS will restart several times during this process. Do NOT disturb
or shutdown the NAS during this process. The Iomega NAS will
shutdown automatically when the rebuild is complete.
Replacing the OS Drive
If you need to replace the OS Drive, please contact Iomega Technical
Support. An Iomega Technical Service Representative will help you order
a replacement OS drive and provide you with step-by-step replacement
instructions.