Motorola PMLN7018 Bedienungsanleitung Seite 9

01_EN.fm Page 7 Monday, March 28, 2016 10:08 AM
8. RSM Bracket allows user to clip on the RSM as shown in
Figure 3.
Note: Do not connect the power cable to the cradle until the
power cable is fully installed.
Figure 3. Clipping the RSM onto the RSM Bracket.
Figure 4. Installing the VPA adaptor holder onto the cradle.
When installing the PMLN6181 Vehicular Charging Cradle
with VPA Kit, follow the following procedure. See Figure 4 :
1. Place the NNTN8040 Vehicular Power Adaptor on the
holder adaptor as show in Figure 4.
Insert Nut
(x2)
Jack Screw
(x2)
Vehicular Power Adaptor
(NTNN8040)
7
Holder Adaptor
Top