Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5
INSTALLATION
The speaker systems can be set up as desired and suspended. Top speakers PRIME-10CX and PRIME-
12CX are also qualified for installation on a speaker stand.
The location must be solid, plane, anti-slip, vibration-free, oscillation-free, and fire-resistant. The installation area must
hold a minimum point load of 5 times the system's load (e.g. weight 20 kg - point load 100 kg). The speaker system must
never be installed higher than 100 cm without secondary attachment.
..............................................................................................................................................................................
Mounting PRIME-208, PRIME-212
Models PRIME-208 and PRIME-212 are supplied in two separate cartons. In the horn's carton, you will find
accessory parts for mounting the components as well as four eye bolts for suspending the speaker. Place
the horn on top of the subwoofer and screw both components together using the included screws.
W W W . P S S O . D E
20
Werbung
Inhaltsverzeichnis
