Last Number Redial - Clarity EXL30 Bedienungsanleitung

LAST NUMBER REDIAL

Fig. I To redial the last number called, lift the handset and press the Redial Button (8).The
telephone will redial up to 31 digits.
FLASH/RECALL
Fig. J Press the Flash/Recall Button (9) to access special services available from your local
telephone company e.g. Call Waiting and 3-Way Calling.
(Subject to your local telephone service).
PROGRAMMING THE MEMORY BUTTONS
Fig. K You can automatically dial twelve programmed telephone numbers using the Memory
Buttons (7). Each button can be programmed (or reprogrammed using the same
procedure) for a telephone number up to 15 digits long.
Fig. L To program a button, follow these steps:
Lift the handset and press the Programme Button (15).
Fig. M Enter the phone number on the keypad just as you would dial it normally.
Press Redial Button (8) if you want to insert a brief pause between two numbers.
Press a Memory Button (7) to store this number on that button.
Immediately hang up the handset.
NOTE: Any number previously stored at that button will be overwritten.
To change a stored number, repeat the programming process starting with Fig. K.
NOTE: Do not programme emergency service numbers into any memory button.
DIRECT AUDIO OUTPUT
Fig. N The Audio Output Socket (2) allows you to connect the EXL30 to a hearing aid, neck
loop, cochlear implant or other assistive listening devices.
To use this port, plug in a compatible auxiliary cable and connect it to your assistive
listening device.
Speak into the handset when you use the Audio Output connection.
NOTE: This port is a TNV connection with respect to EN41003. Only connect equipment that
complies with EN60950 to this port.
All manuals and user guides at all-guides.com
UK
10