Clarity EXL30 Bedienungsanleitung Seite 10

UK
The telephone is ready to use.
DESKTOP
Fig. D Connect the Telephone Line Cable and the Handset Cable to the telephone.
If required, use the supplied adapter.
Lift the handset and listen for a dial tone.The telephone is ready to use.
USING YOUR EXL30
INCOMING VOICE AMPLIFICATION
Fig. E Lift the handset and press the Amplify Button (13) to turn on the amplifier.
Fig. F You can adjust the volume of incoming calls by sliding the Volume Control (10).
The amplifier will turn off when you hang up.
CAUTION: Operation of the Amplification feature will make the receiver very loud. It is
designed specifically for hearing impaired users.
Amplification can be activated by pressing the Amplify Button (13) the Amplify Indicator (14)
indicates that Amplification is in operation.
By activating the Amplification feature you are choosing to increase the level of amplification that
allows any abnormal event to exceed 118dB.This is potentially harmful.The volume control
should be increased gradually to find the minimum level of amplification that is comfortable for
you.Avoid prolonged or unnecessary exposure to high volume levels
INCOMING VOICE TONE
The EXL30 provides extra amplification at the sound frequency you need to boost.To identify
the sound frequency range that best suits your needs, follow these steps:
Lift handset and listen for a dial tone.
Press the Amplify Button (13) to turn on the amplifier (refer to Fig. E on page 4).
Fig. G Slide the Tone Control (17) either right or left for maximum clarity.
The next time and every time you press the the Amplify Button (13), your EXL30 will
give you the best listening clarity.
RINGER VOLUME AND TONE
You can adjust the Ringer Volume Switch (5) as high as 85+ decibels.The settings available are
OFF, LO and HI, as shown in the main diagram on page 3.The Ring Tone Switch (4) has two pitch
settings: LO and HI, as shown in the main diagram on page 3.
HOLD
Fig. H To put the call on hold, press the Call Hold Button (18) and return the handset to its
cradle.You will notice the Call On Hold Indicator (16) illuminates.
NOTE: If you pick up an extension phone on the same line when the EXL30 is on HOLD,
the EXL30 will release the HOLD and you can continue your conversation on the
extension telephone.
9
All manuals and user guides at all-guides.com