Herunterladen Inhalt Inhalt Diese Seite drucken

Symbols Used In The Instructions; General Notes On Safety - Deltafox DG-ESS 2844 Originalbetriebsanleitung

Elektro-leisehäcksler
Vorschau ausblenden Andere Handbücher für DG-ESS 2844:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
GB
Safety class II
Adjusting the pressure plate
Do not dispose of electri-
cal equipment in the do-
mestic waste.
Symbols used in the instruc-
tions
Hazard symbols with in-
formation on prevention of
personal injury and prop-
erty damage.
Warning symbols with
information on the pre-
vention of personal injury
caused by electric shock.
Precaution symbol with in-
formation on prevention of
harm / damage.
Notice symbol with informa-
tion on how to handle the
device properly.

General notes on safety

Observe noise control and
local regulations.
Caution! When using power
tools, observe the following
basic safety measures for
the prevention of electric
shocks and the risk of injury
and fire:
24
Preparation:
• This appliance is not intended
for use by persons with re-
duced physical, sensory or
mental capabilities, or lack of
experience and knowledge,
unless they have been given
supervision or instruction con-
cerning use of the appliance
by a person responsible for
their safety.
• Children should be supervised
to ensure that they do not play
with the appliance.
• Never allow children or other
persons unfamiliar with the
user manual to use the shred-
der. Local regulations or
bylaws may determine the
minimum age for using the
shredder.
• Never use the shredder with
other persons or animals nearby.
• Wear hearing and eye protec-
tion at all times when using the
shredder.
• Wear appropriate protective
clothing such as protective
gloves, firm footwear and long
trousers. Do not wear loosely
fitting clothes or clothes with
dangling cords or belts.
• Only use the shredder in the
open (that is, away from walls
or other rigid structures) on a
firm, level surface.
• Do not use the machine on a
paved, gravelled area, which
could be damaged by ejected
material.
• Before you start up the shred-
der, check that all of the nuts,
bolts and other fastenings are
tight. Covers and shields must

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis