Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Pairing the headset:
(1) The headset must be powered off before you begin to initiate the
pairing. Press the
button till the blue and red indicators begin to
fl ash alternatively. The headset is now in pairing mode.
(2) Initiate the pairing process of your Bluetooth mobile phone. (Please
refer to the manual of your mobile phone.)
(3) When asked the PIN code, please enter "0000" to successfully
complete the pairing process.
(4) When the pairing process is successfully completed, the blue
indicator will fl ash. The headset is now in standby mode.
(5) After the headset is successfully paired with your mobile phone. In
some case, you will still have to connect the headset with your
mobile phone. (Please refer to the mobile phone manual.)
(Please refer to Fig.5.)
blue
red
Fig. 5
Note:
(1) If the headset is not in pairing mode, your mobile phone can not fi nd
the headset. Please set the headset into pairing mode before you
start to pair the headset with your phone.
(2) If no pairing is possible over a period of time (Aprox. 1 minute), the
pairing process will be stopped. You have to repeat STEP 4 to
successfully complete the pairing.
5. Answering or ending calls:
When the headset is paired with your phone, and when there is an
incoming call, you will hear a musical ring. Then press the
14
2R198206bda.indd 16-17
2R198206bda.indd 16-17
to answer the call. When there is a call in session, you can press the
button to end the call.
Note:
Because of the different design of some mobile phones, a
disconnection may automatically happen even when the headset is
powered on. In this case, the headset will not ring if there is an
incoming call. Press
with the mobile phone for an incoming call. (Please refer to Fig.6.)
6. Making calls:
(1) Voice-dialing:
Press the
button. After hearing a beep sound, say the name of the
person you recorded on your phone. (The availability of this function
depends on the design of the mobile phone you use. Please refer to the
manual of your mobile phone for the voice-dialing function. )
(2)Dial the phone number on you mobile phone as you normally do. The
sound will be transmitted to the headset automatically.
7. Changing the volume of the Headset:
(1) Press the
(2) Press the
headset.
(3) You can also adjust the volume from your mobile phone. Please
button
refer to the manual of your mobile phone.
button for 1 second to re-connect the headset
re-
connect
Fig. 6
button to increase the listening volume of the headset.
button to decrease the listening volume of the
25.07.2008 9:44:12 Uhr
25.07.2008 9:44:12 Uhr
15
Werbung
