Applying Contact Pressure To Edge Band; Operation Switch On Machine; Setting The Glue Temperature - HOLZMANN-MASCHINEN KAM 535 Betriebsanleitung

15.1.4

Applying contact pressure to edge band

15.2 Operation
15.2.1 Switch on machine
15.2.2

Setting the glue temperature

HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
The position of the pressure roller (2)
in relation to the edge band and thus
the contact pressure for the edge band
can be changed by turning the ad-
justment knob (1) and thus adapted to
the edge band thickness used.
Turn the main switch (1) to position ON (I).
The control lamp (2) lights up.
The glue temperature can be preset (3) by
means of the control unit (1) and the current
glue temperature is indicated on the display
on position (2).
The preset temperature (3) is set with the
buttons 4,5,6 (button 4 is used to set a reduc-
tion of the preset temperature, button 5 to set
an increase).
Note: If the target glue temperature has not
yet been reached, the feed unit is not re-
leased.
OPERATION
28
KAM535