Moving Heads; Scanners - EuroLite EASY SHOW Bedienungsanleitung

Moving heads

Address these Eurolite fixtures according to the following table. Use the same start address when using multiple
devices of the same type.
Tip
The fixtures should be set up with the display facing the direction in which the light is emitted. For a good effect,
use an even number of moving heads and invert pan and tilt with every second device. Make this adjustment
directly on the fixtures. The fixtures will then work in opposite directions, creating a very nice image.
Compatible Eurolite moving heads include:
Fixture
TMH 75 Hybrid
TMH 75 Hybrid white
LED TMH 60
LED TMH 60 MK2
LED TMH 30
LED TMH 30 MK2
LED TMH 17
LED TMH 13
LED TMH 46
LED TMH W36
LED TMH W63
LED TMH X4
LED TMH S30
LED TMH S90

Scanners

Scanners of the same type also use the same start address. Pan should be inverted at every second device so
that the horizontal axis works in opposite direction or the pan and tilt axis if both axes should run in opposite
direction.
Compatible Eurolite scanners include:
Fixture
LED TSL 150
LED TSL 200
Item no.
51785982
51786090
51785984
51785983
51785980
51785981
51786065
51785972
51785892
51785880
51785880
51785915
51786070
51786075
Item no.
51786119
51786123
26 • EN
Mode
21 channels
21 channels
11 channels
11 channels
11 channels
11 channels
9 channels
9 channels
16 channels
15 channels
15 channels
16 channels
10 channels
15 channels
Mode
9 channels
9 channels
Start address
317
317
338
338
338
338
349
349
358
374
374
399
389
494
Start address
415
424