Toshiba RD-XS64SG Bedienungsanleitung Seite 135

TOSHIBA (RD-XS64SG)_Eng-QG
Antenna + VCR/Satellite receiver/Decoder box + HDD & DVD Recorder + TV
Wall
AV amplifier (receiver) † †
OR
OR
... ... TV
Connecting HDMI/DVI to a TV
HDMI Cable
... ... TV
2005.8.23 3:51 PM Page 2
... ... external device
(VCR/Satellite receiver/Decoder box)
... ... HDD & DVD Recorder
OR OR
... ... DVD Recorder
DVI AdapterCable
Before making or changing any rear panel connections, make sure
that all components are switched off and unplugged from the wall
outlet.
Connect the cable from the antenna/cable TV outlet to HDD & DVD
Recorder.
Connect the AV1 connector on HDD & DVD Recorder to the SCART
AV connector on TV using a SCART cable. Also use the Video/Audio
Cable to connect AUDIO OUT(R/L)/VIDEO OUT jacks on the HDD &
DVD Recorder to the Audio & Video jacks on the TV.
• For better picture quality, if your TV has an S-Video jack, you can
use S-Video cable instead of the yellow video connector on the
Video/Audio cable.
• For the best picture quality, if your TV has Component video
jacks, you can use component cables instead of the yellow video
connector on the Video/Audio cable. If the TV connected supports
Progressive Scan, press the P.SCAN button on the front of the
To RF IN
HDD & DVD Recorder to enjoy higher quality video.
Connect the AV2 connector to a SCART AV connector on
VCR/Satellite receiver/Decoder box.
If you have an AV amplifier
Connect either audio cables from the AUDIO OUT(R/L) jacks on the
HDD & DVD Recorder to the AUDIO IN jacks on your AV amplifier, or
a digital cable from the DIGITAL AUDIO OUT (COAXIAL or
OPTICAL) jack on the HDD & DVD Recorder to the DIGITAL AUDIO
IN jack on your AV amplifier.
Setup "Video output" using on-screen menu.
Refer to page 41 of the Instruction Manual for more information.
The Antenna connection does not pass audio/video signals. To watch
a DVD on your TV, you must connect audio/video or Scart cables.
Connecting to a TV with HDMI Jack
Using the HDMI cable connect the HDMI OUT terminal on the rear of
the HDD & DVD Recorder to the HDMI IN terminal of your TV.
Press the input selector on your TV remote control until the HDMI
signal from the HDD & DVD Recorder appears on your TV screen.
Connecting to a TV with DVI Jack
Using the DVI Adapter Cable, connect the HDMI OUT terminal on the rear of
the HDD & DVD Recorder to the DVI IN terminal of your TV.
Using the audio cables, connect the AUDIO (red and white) OUT terminals
on the rear of the HDD & DVD Recorder to the AUDIO (red and white) IN
terminals of your TV. Turn on the HDD & DVD Recorder and TV.
Press the input selector on your TV remote control until the DVI signal from
the HDD & DVD Recorder appears on your TV screen.
We recommend using one of the discs in the table as they
have been confirmed to be compatible with this unit. Other
discs may not perform correctly.
Media Disc
TDK
Beall
DVD-R That's
Maxell
Panasonic
TDK
Maxell
Optodisc
DVD-RW
Radius
Verbatim
Maxell
Fujifilm
DVD-RAM
TDK
Panasonic
English-2
SPEED
4x
4x
4x
4x
4x
2x
2x
2x
2x
2x
3x
3x
2x
3x