VARDE OVNE IN-LINE 55 Einbauanleitung Seite 8

Congratulations on your new fi replace insert
Before you fi t your new Varde Ovne fi replace insert and begin to use
it, we recommend that you read these fi tting instructions. Please note
that these instructions are advisory only.
Consult your local fi replace dealer or chimney sweep for the current
regulations covering the fi tting of fi replace inserts. This will ensure
that your particular fi replace insert is correctly fi tted. There may be
special conditions which require deviations from the fi tting instruc-
tions, such as the type of fl ue that should be used.
NOTE! You are required to notify your local chimney sweep if a fi re-
place insert has been fi tted. Your local chimney sweep must inspect
and approve your fi tted fi replace insert before it is used.
You may wish to consult your chimney sweep before commencing
installation.
Why choose a fi replace insert
from Varde Ovne?
| Universal frame
| Strong, no-nonsense cast iron doors
| Cold handles
| Easily reversible doors and handles
| Two-step handle to light the stove or rekindle embers
| Design which provides 20-40% better convection
| Easy cleaning thanks to removable smoke plate
| Adjusting screw for simple alignment
| Designed for 7 or 8 types of brickwork
| Environmentally approved: Nordic Swan Ecolabel
14
DANSK | ENGLISH
Before fi tting
Before you begin fi tting your new fi replace insert, make sure you
have the right tools and materials.
THE FOLLOWING ITEMS ARE INCLUDED WITH YOUR
NEW FIREPLACE INSERT:
| Fitting instructions
| Instructions for installation and use
| 45° fl ue
| Glove
YOU WILL ALSO NEED:
| Flexible tubing
| Jubilee clip
| Fireplace mortar
| Insulation batts
| Tools, e.g. spirit level
Building in
5 mm
5 mm
Varde fi replace inserts can be built in various ways, depending
on the design of the fi replace.
| DEUTSCH | FRANÇAIS
5 mm
5 mm
15