Operation - PCE PRCD-K+ Betriebsanleitung

Operation:

green
>Push
green
green
14
Switch ON
• Insert the mains plug of the PRCD-K + into a socket outlet. If the
mains power supply is OK, the signal unit flashes
approx. 2 sec. testing time of the unit.
• Press the green button of the PRCD-K + . The PRCD-K + switches
ON, the signal unit illuminates continuously
• The PRCD-K + is now ready for operation. The button can now
be released.
Switch OFF
• Press the button on the PRCD-K + briefly.
• The signal unit flashes GREEN.
All poles of the PRCD-K + are now switched off.
after
GREEN
GREEN.