Ordering Information - Balluff BIS C-60 1 Serie Handbuch

C60_1-023_819395_0508_en.p65
71
Electrical
Connections
(continued)
Function Displays
* rotatable by 90°
72
Ordering Code
72 E
BIS C-6001
Technical Data
Service interface
Read/Write Head*
option for mounted adapter BIS C-650*
option for mounted adapter BIS C-670*
BIS operating states LED red / green
(LED in housing) LED green / yellow CT1 Present / Operating
LED green / yellow CT2 Present / Operating
I B state LED green
NTER US
(LED on side LED green
of housing) LED green
LED yellow
The CE-Mark is your assurance that our products are in conformance with the
EC-Guideline
and the EMC Law. Testing in our EMC Laboratory, which is accredited by the DATech for
Testing of Electromagnetic Compatibility, has confirmed that Balluff products meet the
EMC requirements of the Generic Standard
EN 61000-6-4 (Emission) and EN 61000-4-2/3/4/5/6 (Noise Immunity).
BIS C-6001

Ordering Information

Balluff Identification System
Type C Read/Write System
Hardware Type
6001 = I B
NTER US (remote bus)
Software Type
023 = I B
NTER US
Read/Write Head
000 = no read/write head
651 = with read/write head Type 651 (with circular antenna on top)
652 = with read/write head Type 652 (with circular antenna on front)
653 = with read/write head Type 653 (with rod antenna)
650 = with two connections for external read/write heads BIS C-3_ _
(except BIS C-350 and C-352)
670 = with offset connection for an external read/write head
BIS C-350 or BIS C-352
Interface
BUS versions
User Connection
KL2 Clamp connection via 1 x PG 9 and 2 x PG 11
RS 232
integrated, BIS C-65_ and following;
2 x connectors 4-pin (male)
for all read/write heads BIS C-3_ _
with 4-pin connector (female),
not BIS C-350 and BIS C-352
1 x connector 8-pin (male) for
read/write heads BIS C-350 / BIS C-352
Ready / Bus active
Reset
Cable Check
Bus active
Remotebus Disable
89/336/EEC (EMC-Guideline)
BIS C-6001-023-_ _ _-03-KL2
E 71