Care And Cleaning; Technical Data - VOLTCRAFT NPS-45-N Bedienungsanleitung

b) Connecting a USB load
• Connect the switched-off USB device to the power supply unit's USB port.
• Connect the power cord's low-voltage plug with the matching socket of the power supply unit.
• Connect the mains plug to a standard mains socket. The LED on the top of the power supply
unit indicates operational readiness.
• Put the power supply unit onto a solid, flame-retardant surface and ensure that the power
supply unit is sufficiently ventilated.
• Now switch the connected USB device on. If it does not function properly, switch it off im-
mediately and disconnect it from the power supply unit.
• Remove the power supply unit from the mains when it is no longer in use.

Care and Cleaning

• Disconnect the product from the mains before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.

Technical Data

Input voltage ................................................100 – 240 V/AC
Input AC frequency ......................................50-60 Hz
Output voltage .............................................9.5 / 12.0 / 15.0 / 18.0 / 19.0 / 20.0 / 5.0 V/DC
Output current ..............................................3.3 / 3.3 / 2.5 / 2.1 / 2.1 / 2.0 / 1.0 A
Output power ...............................................31.4 / 39.6 / 37.5 / 37.8 / 39.9 / 40.0 / 5.0 W
Average active efficiency .............................83.26 % (9.5V+5V)
Efficiency at low load (10%) ........................95.26 % (9.5V+5V)
No load power consumption ........................max 0.27 W
Model identifier:
Commercial registration number:
Manufacturer:
Input cable length ........................................1.2 m
Output cable length .....................................1.5 m
Operating conditions ....................................0 to +35 ºC, 10 – 85 % RH
Storage conditions .......................................-10 to +55 ºC, 5 – 95 % RH
Dimensions (W x H x D) ..............................107 x 33 x 50 mm
Weight .........................................................approx. 224 g (without power cable and plug)
NPS-45-N
HRB 3896
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau
Low-voltage plugs
Plug Imprint
AG
AH
AA
g
P
R
T
V
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
Plug Ø inner/outer Suitable for
0.6 (pin) x 4.5 mm HP
Inner: 3.3 x 6.6 mm Lenovo
Outer: 4.6 x 11 mm
1.0 x 3.0 mm Asus, Samsung,
0.7 x 2.5 mm Asus –Eee PC
2.5 x 5.5 mm Acer, Asus, Compaq,
Gateway, HP, IBM,
Toshiba,
1.7 x 5.5 mm Acer
1.7 x 4.75 mm HP Pavilion series
1.7 x 4.0 mm HP-mini notebook
*2266532_v3_1120_02_mxs_m_en