Care And Cleaning; Technical Data - VOLTCRAFT NPS-90-1-N Bedienungsanleitung

b) Connecting a USB load
• Connect the switched-off USB device to the power supply unit's USB port.
• Connect the power cord's low-voltage plug with the matching socket of the power supply
unit.
• Connect the mains plug to a standard mains socket. The LED on the top of the power supply
unit indicates operational readiness.
• Putthepowersupplyunitontoasolid,flame-retardantsurfaceandensurethatthepower
supplyunitissufficientlyventilated.
• Now switch the connected USB device on. If it does not function properly, switch it off im-
mediately and disconnect it from the power supply unit.
• Remove the power supply unit from the mains when it is no longer in use.

Care and Cleaning

• Disconnect the product from the mains before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Cleantheproductwithadry,fibre-freecloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
Youthusfulfillyourstatutoryobligationsandcontributetotheprotectionoftheenvironment.

Technical Data

Input voltage ................................................100 – 240 V/AC
Input AC frequency ......................................50–60Hz
Output voltage ............................................. 12.0 / 14.0 / 15.0 / 16.0 / 18.0 / 18.5 / 19.0 / 19.5 /
Output current .............................................. 4.0 / 3.5 / 2.0 A
Output power ...............................................max.90.0W
Averageactiveefficiency .............................87.2 %
Efficiencyatlowload(10%) ........................82.0 %
No load power consumption ........................0.283 W
Modelidentifier:
Commercial registration number:
Manufacturer:
Input cable length ........................................1.2 m
Output cable length .....................................1.6 m
Operating conditions ....................................0 to +35 ºC, 10 – 85 % RH
Storage conditions .......................................-10 to +55 ºC, 5 – 95 % RH
Dimensions(WxHxD) ..............................154x38x59mm
Weight .........................................................approx.467.6g(withoutpowercableandplug)
20.0 / 21.0 / 22.0 / 5.0 V/DC
NPS-90-1-N
HRB 3896
Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau
Low-voltage plugs
Plug Imprint
AG
AH
P
T
E
G
X
N
Q V2
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cludingtranslationreserved.Reproductionbyanymethod,e.g.photocopy,microfilming,orthecaptureinelectronicdata
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
Plug Ø inner/outer Suitable for
0.6(pin)x4.5mm HP
Inner:3.3x6.6mm Lenovo
Outer:4.6x11mm
2.5x5.5mm Fujitsu, Acer, Asus,
Compaq, Gateway,
HP, IBM, Panasonic,
Samsung, Sharp, Toshiba,
Hitachi
1.7x4.75mm HP Pavilion series
1.4(pin)x6.5mm Fujitsu, Panasonic, Sony,
Samsung, Dell
1.0(pin)x5.0mm Samsung
1.7x5.5mm Acer
0.9(pin)x7.9mm IBM, Lenovo
0.6(pin)x7.4mm HP
*2266530_v2_0920_02_mxs_m_en