Product Description And Specifications - Bosch GEX 18V-125 Professional Originalbetriebsanleitung

14 | English
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Always wait until the power tool has come to a com-
u
plete stop before placing it down.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry sanding of wood, plastic,
filler and coated surfaces.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2) Complete dust bag
A)
(3) Battery release button
A)
(4) Rechargeable battery
(5) Rechargeable battery charge indicator
(6) Button for rechargeable battery charge indicator
(7) Orbital stroke rate preselection thumbwheel
(8) Sanding pad
(9) Handle (insulated gripping surface)
(10) Sanding sheet
(11) Screws for sanding pad
(12) Sanding pad holder
(13) Extraction outlet
(14) Dust bag
(15) Adapter for dust bag
A)
(16) Extraction hose
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
1 609 92A 5MG | (10.11.2020)
Technical Data
Random orbit sander
Article number
Rated voltage
Orbital stroke rate preselec-
tion
No-load speed n
No-load orbital stroke rate
Orbit diameter
Sanding pad diameter
Weight according to EPTA-
Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation
during storage
Recommended rechargeable
batteries
Recommended battery char-
gers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
Noise/Vibration Information
Noise emission values determined according
to EN 62841-2-4.
Typically, the A-weighted sound pressure level of the power
tool is less than 70 dB(A). The noise level when working can
exceed the volume stated. Wear hearing protection!
Vibration total values a
A)
determined according to EN 62841-2-4:
A)
a < 2.0 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
V
A) -1
min
0
A) -1
min 12,000–20,000
mm
mm
kg
A)
°C
°C
B)
and
ProCORE18V...
(triax vector sum) and uncertainty K
h
2 2
, K = 1.5 m/s ,
Bosch Power Tools
GEX 18V-125
3 601 C72 2..
18
●
6000–10,000
2.5
125
1.5–2.5
0 to +35
–15 to +50
GBA 18V...
GAL 18...
GAX 18...
GAL 36...