F it t in g In s t r u c t io n s
AC Schnitzer Side Skirts G20-G21 / G22
Fitting .... (cont'd.)
Fig. 10
Remove spread rivets at front and rear, and remove
the AC Schnitzer side skirt again. Figure shows holes
made.
Fig. 11
Sand down the AC Schnitzer side skirt in the adhesive
region, and clean using the cleaner supplied.
Fig. 12
Apply the adhesive supplied as a 5 mm bead along
the contact area.
Fitting Instructions No.: 5171 320 310-5171 322 310 / Issue: 09.12.2020 / TSch / REV01
AC Schnitzer - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130 / www.ac-schnitzer.de
17