TBH LN Serie Betriebs- Und Wartungsanleitung Seite 62

Suction arm mounted on a work bench
To mount a suction arm on a work bench, firstly secure the mounting bracket at the required position on the
•
work bench.
You can now secure the mounting flange on this mounting bracket.
•
The suction arm can now be attached to the mounting flange.
•
Fixed pipes / assembly
• Your regional representative will happily provide you with support in planning your piping system using hoses or
spiral pipes. You will therefore be sure that all the necessary parts have been ordered.
• Make sure that there are no leaks in the piping, so that potentially dangerous substances do not escape.
• If the filters are not inserted until installation, make sure that they are properly seated (are all of the seals
pressed well?).
4 Installation, Initial Operation
62-236