Werbung
Verfügbare Sprachen
Verfügbare Sprachen
-
Make sure the power cable and the power adapter are connected properly (see section “Connecting”).
-
Make sure that the monitor was turned on using the power switch (see section “Startup”).
-
Perhaps a power saving mode is active (see section “Energy Saving Functions”)?
-
Is the PC turned on (see your PC’s documentation)?
-
A screen saver may have activated automatically after a certain period of inactivity. Press any key on your
keyboard or move the mouse.
-
Is the signal cable connected to the monitor and the PC’s graphics port (see section “Connecting”)?
-
Is the PC turned on (see your PC’s documentation)?
-
If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see
chapter ”Basic Setup”, section ”Automatic Image Adjustment” or chapter ”OSD Menu Functions”, section ”LCD
Adjust”.
-
Perhaps setup file chosen for the monitor is incorrect. For information on monitor setup under Windows
9x/ME/2000/XP consult the “Configuration” section.
-
Check brightness and contrast settings (see chapter “OSD Menu Functions”, section “Contrast" and “Brightness").
-
Check the ”Fine Tune” and ”Auto-Sync” settings (see corresponding sections of ”OSD Menu Functions” chapter).
-
If the colors are off (e.g. white is not really displayed as white etc), you should adjust the color temperature (see
“Color” function in section “OSD Menu Functions”).
This monitor is equipped with power management functions
according to EPA standard. If your computer is using a
compatible graphics adapter or appropriate software, energy
consumption can be automatically reduced when your
monitor is idle. When the monitor is in power saving mode,
the color of the status LED (see
On
aktive
Off
blanked
This monitor is ENERGY STAR ® -compatible. MAXDATA is an ENERGY STAR ® partner and guarantees that this device
complies with the ENERGY STAR ® guidelines for optimizing power consumption.
‚
in figure 4) will turn orange.
yes
yes
no
no
The monitor will automatically switch back on when you
use the keyboard, mouse or another input device.
The following table illustrates power consumption values
and display indications for this automatic power saving
feature:
< 35 watts
< 3 watts
90
®
0
green
orange
Operating Instructions -
Werbung
