BELINEA 10 15 70 Bedienungsanleitung Seite 14

This monitor is suitable for IBM-compatible systems equipped with an analog VGA connector. An overview of the
numerous functions and features is provided below.
15" diagonal size
1024 x 768 pixels
30 - 62 kHz, 50 - 75 Hz
< 35 Watts
•
The setup location must not be extremely hot, cold,
humid or dusty. Heat and cold can impair the
functionality of the monitor. Humidity and dust can
cause the monitor to fail.
•
Don’t place the monitor near heaters such as
radiators or the like. Don’t expose the monitor to
mechanical vibrations or jarring.
•
Position the monitor so that no direct light or sun
strikes the screen, which could cause reflections
that reduce the quality of the image.
Only use the power cord designated for use in
your country.
The wall outlet should be within easy reach. Pulling
the power plug is the only way to disconnect the
monitor from the power source.
- Belinea 10 15 70
The LCD monitor has an effective diagonal size of 15" (38.1 cm) so as far as the effective
display size is concerned, it is comparable to a standard 17" monitor. The monitor attains
a maximum resolution of 1024 x 768 pixels.
The monitor automatically scans all horizontal frequencies between 30 and 62 kHz as
well as all vertical frequencies between 50 and 75 Hz.
Digital Front Control with 21 memory settings (16 preset and 5 user defined) and digital
control keys make setting the various graphic and color standards easy.
The LCD monitor has a power consumption 50% below that of ordinary CRT monitors
during typical operation. In addition, it is EPA compliant, drastically reducing power
consumption when not in use (< 3 Watts).
The LCD monitor has a depth of only 5.9" (15.2 cm), minimizing its space requirements
and leaving more desktop space to you.
The monitor is equipped with an internal stereo speaker system (amplifier: 1W at 8 ohms
/ 1 kHz - 15 kHz, speakers: 2W peak, 1W rated) which can be connected to your sound
card.
This monitor exceeds the TCO 99 emission requirements.
The power cord must not be damaged. Do not
place any objects on the power cord and make
sure it does not have any knots. To unplug the
cord, always pull on the plug and not on the cable
itself.
•
Avoid covering the ventilation slots. Air circulation
is necessary to prevent the monitor from
overheating. If the air circulation is restricted it
could cause fire or damage the monitor.
•
Do not use any solvents to clean the monitor, as
the housing could be damaged. For more
information about cleaning the monitor, please see
“Caring for your Monitor”.
Never open the monitor housing yourself. There
is a danger of electric shock and other hazards.
The monitor may only be opened and serviced by
qualified professionals.
The LCD monitor may
included power supply.
be operated with the