BELINEA 10 15 70 Bedienungsanleitung Seite 16

➧
If using the monitor under Windows
we strongly recommend installing the Belinea settings file.
You can get this file from your Belinea dealer or download
it from the MAXDATA FTP server at ftp.maxdata.com.
Here, click the “Belinea_Treiber_Driver” directory and
download the Belinea.inf and README_Berlinea.TXT
files. Follow the installation instructions in the
README_Belinea.TXT file.
➧
You can adjust the image settings (such as brightness,
contrast, image position, phase etc) manually or by using
the LCD monitor’s automatic image adjustment feature.
This will adjust the image parameters to their optimal
settings for the current graphics mode. Press
in fig. 4) to launch the automatic adjustment. The process
will take a short while until completed.
The OSD menu is a window on your screen that allows
you to view and change display settings. To change an
OSD setting:
Figure 4. Monitor features
- Belinea 10 15 70
➧ ➧ ➧ ➧ ➧
Under Windows
Select the vertical frequency and the number of colors
9x/ME/2000 or XP
®
directly from within the “Settings” à “Control Panel” à
“Display” à “Settings” menu.
➧
You can call up the automatic contrast adjustment directly
by pressing the
menu is not displayed. This optimizes the contrast setting
for the current display.
ƒ
(
NT 4.0 no separate setup file is required.
®
„
button ( in fig. 4) while the OSD
†
Press the button (
OSD menu on the screen.
There are a total of 9 OSD submenus divided by
categories. Select the desired submenu by pressing
the OSD button or (see section ”OSD Menu
Functions”).
Press the OSD button to activate the selected
function or associated submenu.
If you selected a submenu, now select the subfunction
you want using the or OSD buttons, then press
the button.
Set the desired value using the OSD button
Press the button again to save the setting.
Repeat steps 2-5 to make further adjustments as
needed.
The OSD menu automatically disappears if no changes
are made for more than 30 seconds. The current
settings will be saved. You can close it manually by
pressing the button.
in fig. 4) to display the
or .