Axis M11 Serie Installationsanleitung Seite 11

AXIS M11 Series Installation Guide
Adjust Image and Focus
AXIS M1103/M1104:
Unscrew the focus puller on the lens. Adjust the focus as required. Re-tighten
the focus puller.
Grip the outer rim of the lens while focusing (see Hardware Overview).
Gripping the whole lens could cause the lens to come unscrewed.
AXIS M1113/M1114:
1. Click the Setup link at the top, right in the camera's web interface and go to Basic Setup >
Focus.
2. In the Focus Adjustment page set the DC-Iris to Disabled and click Save.
3. Unscrew the zoom puller on the lens by turning it anti-clockwise. Adjust the zoom setting as
required. Re-tighten the zoom puller.
4. Unscrew the focus puller on the lens. Adjust the focus as required. Re-tighten the focus puller.
5. From the Focus Adjustment page, set the DC-Iris to Enabled and click Save.
• The DC-Iris should always be disabled while focusing the
camera. This opens the iris to its maximum, which gives the
smallest depth of field and thus the best conditions for correct
focusing. When the focus is set with this method it will then be
maintained in all light conditions
• The design of AXIS M11 Series allows for slight lens movement
to ensure sensor alignment.
Focus pulle
Lens
Focus puller Zoom puller
Page 11
r