General Information; Exclusion Of Liability; Warranty - HYDAC ELECTRONIC HPT 1000 CAN Serie Bedienungsanleitung

4

1 General information

The pressure sensors of the HPT 1000 CAN series are individually subjected to calibration
and final testing on computer operated test stations. They are maintenance-free and operate
perfectly when used according to the specifications (see Technical Data).
However, if there is a cause for complaint, please contact HYDAC Service.
Interference by anyone other than HYDAC personnel will invalidate all warranty claims.
E

1.1 Exclusion of liability

This instruction manual was made to the best of our knowledge. Nevertheless and despite
the greatest care, it is possible that they may contain errors. Therefore please understand
that in the absence of any provisions to the contrary hereinafter our warranty and liability –
for any legal reasons whatsoever – are excluded in respect of the information in this operating
manual. In particular, we shall not be liable for lost profit or other financial loss. This exclusion
of liability does not apply in cases of intent and gross negligence. Moreover, it does not apply
to defects which have been deceitfully concealed or whose absence has been guaranteed,
nor in cases of culpable harm to life, physical injury and damage to health. If we negligently
breach any material contractual obligation, our liability shall be limited to foreseeable damage.
Claims due to the Product Liability shall remain unaffected.
In the event of translation, only the original version of the operating manual in German is
legally valid.

1.2 Warranty

The General Terms and Conditions ("Allgemeine Geschäftsbedingungen") of HYDAC
ELECTRONIC GMBH always apply. These are available to the operator with the order
confirmation or when the contract is concluded at the latest.
You will also find these under www.hydac.com -> General Terms and Conditions.
Edition: 2020-05-08
Before commissioning, check the instrument and any accessories
supplied. Before commissioning, please read the operating instructions.
Ensure that the unit is suitable for your application.
If the instrument is not handled correctly, or if the operating instructions
and specifications are not adhered to, damage to property or personal
injury can result.
HYDAC ELECTRONIC GMBH
HPT 1000 CAN
Part No.: 670023