Aux - auna V-20 DAB Bedienungsanleitung

EN
(mono/stereo) - Time&Date
DAB: DLS (Dynamic label segment is a scrolling message that the
broadcaster may include with their transmissions. This message usually
includes information, such as program detail etc.) - Signal strength -
Program Type - Ensemble/Multiplex (A multiplex/ensemble is a collection
of radio stations that are bundled and transmitted on one frequency. There
are national and local multiplexes. Local ones contain stations that are
specific to that area e.g. MXR West.) - Channel (current frequency) - Mode
(current mode) - Time&Date .
BT
The BT function can be used to stream music from any BT device such
as smartphones or tablets, but does not support hands free telephone
operation.
Switch the V-20 on and press SOURCE to switch to BT mode.
Activate BT on your BT device and pair with the V-20 DAB.
Use your BT device to operate audio/media playback or use th V-20 buttons
/ / .
Type in "0000", if prompted to enter a password.
NFC: When enabled on the transmitting audio device; all that is required is
for you to touch the NFC logo on the front of the micro system with the NFC
hotspot on your compatible audio device. Enable NFC on your audio device
(such as a mobile phone). Touch the NFC hot spot on your audio device to
the NFC logo on the front of the micro system. You may need to move the
device around slightly to hit the exact contact point. When the connection
is made, a melody is played and the 'BT-LINK' text on the display will stop
flashing and the device will be automatically connected.
To remove a paired device using the micro system, press and hold the
UNPAIR/ENTER button on the micro system or press the UNPAIR button on
the remote The 'BT LINK' text will begin flashing again.

AUX

Aux-In: Use a 3.5 mm audio cable to connect external media/audio players
to the AUDIO IN socket on the rear. Press SOURCE repeatedly to switch
to AUX mode. Operate the playback on your external device. If using the
headphone out, set it to about 70% volume, to avoid hum. Adjust the output
volume on the V-20, then.
28