Camera Settings; Camera Back; Ai/Aes Mode Selector; Auto Iris Lens Type Selector (Video Drive Or Direct Dc Drive) - Honeywell E Serie Installationsanleitung

Camera Settings

Camera Back

Figure 1 Rear View
Mains Low Voltage
Shaded box indicates default switch setting

AI/AES Mode Selector

The Auto Electronic Shutter (AES) feature compensates for excessive light
levels by automatically adjusting the shutter speed of the camera. Select
AES for manual iris lenses. The default setting is AI.
Auto Iris Lens Type Selector (Video Drive or
Direct DC Drive)
Automatic iris lenses (Direct Drive (DC) or Video Drive types) are connected
to the camera via a 4-pin square socket located at the side of the camera.
Select the AI switch on the rear of the camera for all automatic iris lenses.
Then set the Auto Iris Lens Type Selector to VIDEO (Video drive) or DD
(Direct DC drive), depending on your particular lens. The default setting is
DD.
Rev 2.01 3 Document 900.0323
05/05