Clock Settings - Panasonic DMR-EH60 Bedienungsanleitung

Changing the unit's settings
Refer to the control reference at the bottom of page 54.

Clock settings

Usually, the unit's Preset Download or Auto-Setup function (➡ 18, 19) automatically adjusts the clock to correct time. Under some reception
conditions, however, the unit cannot set the clock automatically.
In this case, follow the operation steps below to manually set the clock.
≥In the case of a power failure, the clock setting remains in memory for approximately 60 minutes.
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4] to select "To Others" and press [ENTER].
3
Press [3, 4] to select "SETUP" and press [ENTER].
4
Press [3, 4] to select "Others" and press [1].
5
Press [3, 4] to select "Clock" and press [ENTER].
Auto Clock Setting
If a TV station transmits a time setting signal, and when "Automatic"
in the Clock setting menu is set to "On", the automatic time
correction function checks the time and if necessary it is adjusted
several times every day.
6
Press [3, 4] to select "On" of
"Automatic" and press [ENTER].
Auto clock setting starts.
The following screen appears when setting is complete.
Clock
Time
15 : 45 : 39
CHANGE Automatic clock setting completed.
ENTER: access
ENTER
RETURN
To stop partway
Press [RETURN].
≥If the unit cannot set the clock automatically, set the clock
manually (➡ right, step 6).
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
RQT8203
60
60
Automatic On
Date
1 . 8 . 2005
RETURN: leave
Manual Clock Setting
6
Press [3, 4] to select "Off" of
"Automatic" and press [ENTER].
Clock
Automatic Off
Time Date
15 : 45 : 39 1 . 8 . 2005
No.
0 9
Please set clock manually.
CHANGE
SELECT ENTER: store RETURN: leave
ENTER
RETURN
7
Press [2, 1] to select the item you
want to change.
The items change as follows:
Hour!#Minute!#Second!#Day!#Month!#Year
^-----------------------------------------------------------------------------------------J
8
Press [3, 4] to change the setting.
You can also use the numbered buttons for setting.
9
Press [ENTER] when you have
finished the settings.
The clock starts.